Vac Bench Pro Professional Vacuum Hold Down Table (Birch Plywood)

Vac Bench Pro Professional Vacuum Hold Down Table (Birch Plywood)
£230.00 £191.67
Availability: In stock
SKU
VBPTBP

18mm Plywood Workbench to suit any Tradesman or DIY enthusiast.

Manufactured from High Quality Birch 18mm Structual Plywood throughout.

This is a Vacuum Hold Down Table for Routing, Sanding, Sawing, Carving etc and NOT a Vacuum box to take away dust.

Do your G Cramps, Speed Cramps etc ever get in the way when Routing, Cutting, Sanding ?

Please click here - take a look at this short video 

VAC BENCH PRO can be assembled and disassembled without any tools or hardware in under a minute. Just connect up your own Shop Vac to the supplied port on the underside and your up and running in minutes. It's ideal to stow away flatpack in your van, shed, garage etc.

Vaccum pulls through the MDF Spoil board, this board protects your matrix pro table from damage by router bits, saw blades etc. When the MDF gets damaged it can either be skimmed or replaced.

Pulling vacuum through the porous MDF spoil board has limitations on the size of work to hold down and as a rule of thumb anything smaller than an A4 sheet is not recommended, unless further planning is sought, this even applies to cnc machines.

That's not to say you can't, in fact quite the opposite. By making small pods to fit on the matrix you can hold down very small pieces of work.

All you need to do is contact us regarding advise on how to go about this.

We use this exact same work hold down technology in our CNC Work Centre.

This Vac Table is ideal for home, shop, and to take on jobs. Set it up quickly and then break down and store it out of the way when not required.

This has also been designed with storage slots in the sides for your Festool Track Guides.

This model also includes a shelf either side for safe and handy storage of screwdrivers etc.

Whats included

1 @ Vacuum Pro Table.
1 @ MDF Spoil Board
1 @ 4 metre Vacuum Gasket Seal

PLEASE NOTE

This is NOT a Festool, Makita or DeWalt product. The Festool Accessories and Workbench Dogs shown in the pictures are NOT included in this sale.

More Information
MaterialBirch Plywood 18mm
Product Height (mm)740
Product Width (mm)1020
Product Depth (mm)790
Write Your Own Review
You're reviewing:Vac Bench Pro Professional Vacuum Hold Down Table (Birch Plywood)

Delivery Charges are dependent on location.

Charges will be quoted by adding the product to the cart , and then entering your postcode