Oval Glamping Pod Frame Kit 4000mm x 4000mm
Cross section of 100mm deep allowing you to fill the cavity with insulation.
All frame arches when built are 36mm in thickness making them a very professional sturdy construction.
Frames are pre drilled at precise points allowing for you to run electric cables etc through the cavity if required.
All our kits are constructed from High Quality 18mm WISA Spruce Structural Plywood.
All kits comprise of a cross section of 100mm allowing you to fill the cavity with insulation should you require.
All arches when built are 36mm in thickness making them a very professional sturdy construction.
All kits are pre drilled at precise points allowing for you to run electric cables etc through the cavity if required.
With these precision computer cut and designed frame work all you need to do is assemble the components to construct the arched frames. All parts are numbered to make assembly easy.
All frame work is constructed using the tried and tested 'Tusk Tenon and Wedge Joints'.
With this frame the two end walls are left open , for you to build yourself - examples include a window at one end and a door at the other. We do not provide the wood for the end walls.
To construct the kit you will usually need: Approx 5 litres Waterproof Glue (PVA or similar) Either a Nail Gun and Nails or Powered screwdriver and screws to construct the arched frames. A Hammer to tap the wedges in.
|Frame Type||Oval Pod|
|Frame Height (mm)||2446|
|Frame Length (mm)||4000|
|Frame Width (mm)||4000|
|Frame Material||Structural WISA Spruce Plywood 18mm|
Delivery Charges are dependent on location.
Charges will be quoted by adding the product to the cart , and then entering your postcode